Kenmore Elite 42623 Manuel du propriétaire télécharger pdf (Page 18)

Setting Oven Controls

Setting The Clock

When the appliance is first powered up, 12:00 will flash in the

display (Figure 19). The time of day must first be set before

operating the oven.

To set clock to 1:30:

1. Press Set Clock.

2. Enter 1 3 0 using numeric keys.

3. Press .

Important note:

The clock cannot be changed when a Cook Time, Self Clean,

Delay Start or cooking feature is active.

• When timer is set for more than 1 hour it will display hours

and minutes until 1 hour remains. When less than 1 hour

remains, the display counts down in minutes and seconds.

With less than 1 minute remaining, only seconds will display.

• If the timer is active during a cooking process, the timer will

show in the display. To view the status of any other active

oven function, press the key of the cooking function once

and it will appear in the display for a few seconds.

Setting 12 hour or 24 hour display mode

The clock display mode allows you to select 12 hr or 24 hr

modes. The factory pre-set clock display mode is 12 hours.

To set 12 hr or 24 hr display mode:

1. Press and hold Set Clock for 6 seconds.

2. Press Self Clean to toggle between 12 Hr day or 24 Hr day

display modes. (Figure 20)

3. Press to accept choice.

Changing Between Continuous Bake Setting or 12 Hour

Energy Saving

The oven control has a factory preset built-in 12 Hour Energy

Saving feature that will turn off the oven if the oven is left on for

more than 12 hours. The control may be programmed to

override this feature to bake continuously.

To change between continuous bake or 12 Hour Energy Saving

feature:

1. Press and hold Timer Set/Off for 6 seconds

2. Press Self Clean to toggle between 12 Hour OFF or Stay On

(Figure 21) feature.

3. Press to accept choice

Changing Oven Temperature Display

The oven control is preset for temperatures in °F (Fahrenheit)

when shipped from the factory. The control can be changed to

display either Fahrenheit or Celsius.

To change the display to F (Fahrenheit) or C (Celsius):

1. Press and hold Broil for 6 seconds.

2. Once F (or C) appears in the display, press Self Clean to

toggle between Fahrenheit and Celsius temperature display

modes.

3. Press to accept choice.

Important note:

The oven temperature display cannot be changed during the

cooking process or if a Delay Start has been set or Self Clean is

active.

Figure 19: 12:00 in display before setting clock

Figure 20: 12 Hr dAy and 24 Hr dAy settings

Figure 21: 12 hr energy saving (L) and continuous setting (R)

Figure 22: Display showing Fahrenheit and Celsius

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Kenmore Elite 42623 Manuel du propriétaire Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Kenmore Elite 42623